Description
2009 Jeep Commander Fobik PN: 68066842AF
Extended warranty available on the checkout page.
Part Numbers: 05026347AD, 68066842AA, 68066842AF
FCC IDs: M3N5WY783X, IYZ-C01C
Condition: Brand New Mopar
This is a Fobik remote which is unlocked and is ready for programming. If you have 2 working keys that start the engine you will be able to program additional fobiks yourself. The current FCC ID is IYZ-C01C. The original was M3N5WY783X. This remote has been tested for proper functioning on a keyless entry tester, smart key tester, and transponder tester. Emergency key – included.
Programming Procedure:
You will need key cutting and in the event that you don’t have two working keys already, you will need an automotive locksmith to program the fobiks to work with your vehice. You can find an automotive locksmith using this website: autolocksmithfinder.com
Make sure you have two FOBIKs or POD keys that will start the vehicle before beginning the procedure.
1. Insert the first valid FOBIK or POD key into the ignition and turn
the ignition on for more than 3 seconds but less than 15
seconds. Turn the ignition off and remove the first key.
2. Within 15 seconds, use the second valid FOBIK or POD key to
turn the ignition to on. After 10 seconds a chime will sound and
the theft alarm light will begin to flash. Turn the ignition to off
and remove the second valid FOBIK or POD key.
3. Insert the new invalid key into the ignition and turn the ignition
to on within 60 seconds. After 10 seconds a single chime will
sound. The theft alarm light will stop flashing, then it will turn
on for 3 seconds; then it will turn off.
The new FOBIK or POD key has been validated and will
be able to start the vehicle. If it was a FOBIK then the
remote will now operate the keyless entry system.
Repeat this procedure for up to 8 keys.
Works on:
Jeep Commander (2008-2010).
