Description
2009 Dodge Nitro OEM Remote Head Key FCC: KOBDT04A PN: 68002316AC
Remote For Dodge:
This remote features 4 buttons: Lock, Unlock, Remote Start and Panic. This remote sends it’s signals on a frequency of 315Mhz. This remote will work for your vehicle if your vehicle is equipped with factory keyless entry.
FCC ID: KOBDT04A
Part Number: 68002316AC
Replaces Part Numbers: 68002316AA, 68002316AB, 68003387AA, 68026372AA, 68026372AB, 68026372AC
Condition: OEM New
Brand: Dodge
Programming Procedure:
Make sure you have two keys that will start the vehicle before beginning the procedure.
1. Cut the new key to match your existing keys.
2. Insert the first valid key into the ignition and turn the ignition on for more than 3 seconds but less than 15 seconds. Turn the ignition off and remove the first key.
3. Within 15 seconds, use the second valid key to turn the ignition to on. After 10 seconds a chime will sound and the theft alarm light will begin to flash. Turn the ignition to off and remove the second key.
4. Insert the newly cut invalid key into the ignition and turn the ignition to on within 60 seconds. After 10 seconds a single chime will sound. The theft alarm light will stop flashing, then it will turn on for 3 seconds; then it will turn off. The new key has been validated and will be able to start the vehicle. If it was a remote head key then the remote will now operate the keyless entry system. Repeat this procedure for up to 8 keys.
The following vehicles can use this remote when equipped with the factory keyless entry system:
2007 Dodge Dakota, 2008 Dodge Dakota, 2009 Dodge Dakota, 2010 Dodge Dakota, 2011 Dodge Dakota, 2006 Dodge Durango, 2007 Dodge Durango, 2009 Dodge Durango, 2010 Dodge Durango, 2007 Dodge Ram Pickup, 2008 Dodge Ram Pickup and 2009 Dodge Ram Pickup.
