Description
1994 Infiniti Q45 Remote FCC ID: A269ZUA073, 28268-49U10
Remotes are tested on keyless entry testers before shipping to ensure you receive a remote that is capable of working. Programming instructions and battery are included with the remote. Free tech support available.
Remote For Infiniti Nissan:
This is the factory remote for 93-96 G20, 93-97 J30, 94-96 Q45, 93-96 300ZX. The FCC ID of the original remote is A269ZUA073.
Programming Procedure:
IMPORTANT: Before entering programming mode, have in possession all of the transmitters you will be using on the vehicle. Once you program the transmitter, all previous codes will be erased from the memory. The other transmitters will not be functional until you program the transmitters again.
1. Open the trunk.
2. Close and lock all doors with power door lock on the driver?? door.
3. Insert key in ignition and remove it 6 times within 10 seconds. Make sure you withdraw the key completely each time. If you do it too fast the vehicle will not enter programming mode.
4. Manually unlock and lock the driver door once with the manual knob.
5. Within 5 seconds push the LOCK button on the remote.
6. If there are any other remotes you wish to program including your old ones then repeat step 4 and 5 for each remote. You may program up to 4 remotes.
7. Unlock driver?? door with manual lock knob, open driver?? door and close it.
The following vehicles can use this remote when equipped with the factory keyless entry system:
Infiniti G20 (1993-1996), Infiniti J30 (1993-1997), Infiniti Q45 (1994-1996), Nissan 300ZX (1993-1996).
