Description
1994 Honda Passport Passport Dealer Installed Security Remote G57ITX318
We sell a replacement remote which looks different but works the same. The remote comes with a battery and programming instructions. Free tech support is included for programming help.
Remote For Honda:
This is the remote for 1994-1995 Honda Passport when equipped with the Dealership installed system. The original remote says FCC ID G57ITX318 and the honda part number was 2-91309-401-0.
Programming Procedure:
1. Locate the security system control unit under the driver’s seat.
2. Rub your finger over the label on the top of the control unit until you find the depression. Once you find it, push your finger through the label to expose the hole underneath. Inside the hole is a square, yellow button, this is the programming button.
3. Turn the ignition switch to ON, then turn it to LOCK.
4. Press and hold the programming button. Check that the security siren emits four separate chirps followed by a five-chirp burst. This confirms that the system is in programming mode.The siren then emits prompting chirps at 3-second intervals.
5. Release the programming button.
6. After a prompting chirp, press the “LOCK” button on the transmitter. Verify that the siren emits a confirmation chirp to confirm that the transmitter’s code was accepted by the control unit. If you wait more than 30 seconds between programminf transmitters, the siren emits three chirps and the system exits the programming mode.
7. To program additional tranmitters, wait for another prompting chirp, then press the “LOCK” button. (You can program up to four transmitter per vehicle.)
8. To exit the programming mode, turn the ignation switch to ON, then turn it to LOCK.
The following vehicles can use this remote when equipped with the factory keyless entry system:
Honda Passport (1994-1995).
