Description
1993 Nissan Pathfinder Pathfinder Remote FCC: G57NTX318 PN: 999U7-6D001
Extended warranty is available on the checkout page.
All vehicles using this remote are onboard programmable. Remote comes with easy programming instructions so you can program your vehicle to accept new remotes. Battery is included. If you have trouble with the programming we have free tech support.
Remote For Nissan:
FCC ID is G57NTX318
Part Number: 999U7-6D001
It has 2 buttons: Lock/Unlock, and Panic. This remote transmits at 318 MHz. We test the remote before sending it to you to be sure it is sending proper signals. Nissan has discontinued this part.
Programming Procedure:
1. Locate the electronic module. (It is located under the driver?? seat.)
2. Under the center of the Nissan label on the top of the module there is a 7/8″ hole. Rub your finger over the label to locate the hole and punch through the label with your finger or a dull object such as a pencil eraser. Inside the hole is a square yellow button. This is the programming button.
3. Cycle the ignition key to ON then back to OFF. Press and hold the programming button. The siren will emit four single introduction tones followed by a five tone burst. Release the programming button. The siren will now emit single prompting tones at one second intervals. Each prompting tone is an opportunity to program a remote. After any prompting tone press the large (arm/disarm) button of a remote. The siren will immediately emit a confirmation tone. Wait for another prompting tone and press the large button of another remote. Repeat until all transmitters to be used with the vehicle have been learned.
4. Turn the ignition key ON then OFF to exit programming mode.
The following vehicles can use this remote when equipped with the factory keyless entry system:
Nissan Pathfinder (1993-1995).
