Description
2008 Cadillac Escalade Remote PN: 22951509 22936101
Remote For GMC Buick Cadillac Saturn Chevrolet:
This remote is used on vehicles built for the US market. It is a 315MHz remote with 5 buttons (Remote Start, Lock, Unlock, Liftgate, and Panic.)
Remote was first made with the FCC ID OUC60270 and part number 15913415. GM soon discontinued that part number and superseded it with these: 15857839, 25839476, 15916016, 20869963, 20869053, 20952477, 22756459, 22936101, 22951509, and 20952476. The FCC ID rolled from OUC60270 to OUC60221. At the time this description is being written the current GM part number is 22936101. All these part numbers are unimportant because there is nothing unique about them other than the number printed on the back of the case. They all contain the same type of circuit boards.
FCC ID: OUC60270, OUC60221
GM Part Numbers: 22951509, 22936101
Strattec Part Number: 5922373, 5922377
Condition: Brand New Aftermarket (No Logo)
Brand: Avicero
2007-2010 vehicles are onboard programmable, meaning you can program the vehicle to accept new remotes yourself easily with the included instructions. 2011-2017 vehicles are not onboard programmable, meaning you will need a local automotive locksmith or dealer to use programming equipment to program your vehicle to accept new remotes.
Programming Procedure:
- GMC Acadia (2011-2016), Acadia Limited (2017), Yukon (2011-2014);
- Buick Enclave (2011-2017);
- Chevrolet Traverse (2011-2014), Suburban (2011-2014), Tahoe (2011-2014)
Since your vehicle is not onboard programmable or you need key cutting, you will need a dealer or automotive locksmith to program the vehicle to accept the replacement remote or key or to cut a key. Please use an automotive locksmith rather than the dealer. You are likely to get a better service for a more reasonable price.
Locksmiths make their prices based on their local market as well as the cost of the equipment used for you cutting or programming. Locksmith equipment for key cutting and vehicle programming is very expensive and most of the charge is to compensate them for their initial equipment investment.
An automotive locksmith will program your new remotes or keys by hooking up an expensive scan tool to your vehicle computer and making the vehicle learn the new remotes or keys.
Programming Procedure:
- Buick Enclave (2008-2010);
- Chevrolet Traverse (2009-2010);
- GMC Acadia (2007-2010) ,
- Saturn Outlook (2007-2010) .
Insert the ignition key and turn to the ON position (position just before you crank the vehicle) so you can access the (DIC).
1. Press the vehicle information button until PRESS TO RELEARN REMOTE KEY displays.
2. Press the set/reset button until REMOTE KEY LEARNING ACTIVE is displayed.
3. Press and hold the lock and unlock buttons on the first transmitter at the same time for about 15 seconds. On vehicles with memory recall seats, the first transmitter learned will match driver 1 and the second will match driver 2. A chime will sound indicating that the transmitter is matched.
4. To match additional transmitters at this time, repeat Step 3. Each vehicle can have a maximum of eight transmitters matched to it.
5. To exit the programming mode, you must cycle the key to LOCK/OFF.
Programming Procedure:
- Cadillac Escalade (2007-2010), SRX (2007);
- Chevrolet Suburban (2007-2010), Tahoe (2007-2010);
- GMC Yukon (2007-2010).
Locate the Drivers Information Center buttons on the vehicle. Insert the key into ignition and turn into ON position.
1. Press the vehicle information button until PRESS ??TO RELEARN REMOTE KEY displays.
2. Press the set/reset button until REMOTE KEY LEARNING ACTIVE is displayed.
3. Press and hold the lock and unlock buttons on the first transmitter at the same time for about 15 seconds. On vehicles with memory recall seats, the first transmitter learned will match driver 1 and the second will match driver 2. A chime will sound indicating that the transmitter is matched.
4. To match additional transmitters at this time, repeat Step 3. Each vehicle can have a maximum of eight transmitters matched to it.
5. To exit the programming mode, you must cycle the key to LOCK/OFF.
The following vehicles can use this remote when equipped with the factory keyless entry system:
- GMC Acadia (2011-2016), Yukon (2011-2014), Yukon XL 1500 (2007-2014);
- Buick Enclave (2008-2017);
- Cadillac Escalade (2007-2010), Cadillac SRX (2007);
- Chevrolet Suburban (2007-2013), Suburban 1500 (2011-2013), Suburban 2500 (2011-2013), Tahoe (2011-2014),Traverse (2009-2017);
- Saturn Outlook (2007-2010).
